Lumber
Home Up

 

Our normal hours of operation are Monday - Friday from 8 to 4:30.
However, for best results please call ahead to let us know what you're looking for.

Last Updated 07/02/10

RETAIL PRICES

ROUGH LUMBER

Thickness in Inches *

4/4, Surf**

Roughsawn

Std Prem 4/4 5/4 6/4 8/4

Ash

1.61 2.96 2.84 3.00 3.14 3.43

Basswood

1.44 2.20 2.09 2.17 2.61 2.73

Birch

NA 3.54 3.43 3.86 NA NA

Cherry

4.14 5.97 5.86 6.07 6.43 6.86

Mahogany

6.33 NA 10.50 11.43 12.14 13.57

Maple

2.18 3.64 3.53 .366 3.77 4.64

Oak, Red

2.06 2.90 2.79 3.07 3.46 3.93

Poplar

NA 1.77 1.66 1.93 2.21 2.36

Walnut

4.56 7.54 7.43 7.71 8.00 9.29

* Expect to get the following finished (planed)
dimensions out of these roughsawn thicknesses:
4/4 ---- 3/4"
5/4 ---- 1"
6/4 ---- 1-1/4"
8/4 ---- 1-1/2"

** hit-or-miss dressed to 15/16"

*********************************************************************
*********************************************************************

DIMENSION LUMBER

1 x 4

1 x 5

1 x 6

1 x 8

Birch, Nat. 1.95 2.31 2.68 3.51

Cherry

3.22

3.87

4.51

5.81

Maple

2.07

2.43

2.80

3.53

Oak

1.65

1.92

2.18

2.72

Poplar

1.36

1.55

1.74

2.15

All dimensional lumber is Kiln Dried, priced by the Lineal Foot and milled to standard nominal sizes:

1 x 4 = 3/4” x 3-1/2”
1 x 5 = 3/4” x 4-1/2” 
1 x 6 = 3/4” x 5-1/2”
1 x 8 = 3/4” x 7-1/4”
1 x 10 = 3/4” x 9-1/4”
1 x 12 = 3/4” x 11-1/4”

Prices are for random length of in-stock material. Requests for specific lengths may be subject to custom pricing.

*********************************************************************
*********************************************************************

bulletGeneral Terms:
bulletRough Lumber is priced per Board Foot (BF).
bulletDimension Lumber is priced by Lineal Foot (LF).
bulletAll lumber is Select & Better, and kiln-dried (6-8%).
bulletLumber is random width (typically 4 to 8" rough),
bulletlength is usually 8', but sometimes 10-12', etc.
bullet"NA" indicates wood/thickness is rarely available.
bulletPremiums may apply to some widths & lengths.
bulletPrices are FOB our plant in Chester, VT.
bulletMILLING:

We can provide a variety of milling services. The 
services most often requested include:
bulletS/2/S (planed to thickness) ------ $0.85 / BF
bulletS/3/S (S/2/S & rip 1 edge) ---- $1.15 / BF
bulletS/4/S (planed 4 sides to size) ---- $1.50 / Lin Ft
bullet(minimum labor charge $15)

* multiply by rough thickness for sizes other than 4/4

For milling on wood not purchased from Vermont Hardwoods, multiply milling prices x 2.

 

 

 

 

Vermont Hardwoods
386 Depot St  --  Chester, VT  05143  --  1-888-442-7396

©1999 - 2010 Vermont Hardwoods, all rights reserved. Click here for our Privacy Statement 
Contact information
  or write to the  webmaster